How to Setup and Connect A Pospac License

Give details on how to activate a license and how to connect a secondary computer to the activated license

Steps to activation 

1. open the Software License Utility Software
   1. This License Utility was installed a part of the SmartDrone Installer
   
2. Once opened make sure you are connected to the internet before activation
3. Click on the activate license button 
4. copy and past the EIN code provided on purchase of a Discovery Drone.
5. Click Activate and wait for the license features to populate in the License Information window

Connecting a Secondary Computer to the Activated License

1. First make sure you are connected to the same network that the activated license computer is connected to 
   1. Make sure the activated license computer is on 
2. Make sure that your network allows computers to be discovered within your network
   1. Most networks allow this but talk with your IT department if you are experiencing issues in searching for the activated license
3. Open the Software License Utility Software
   1. This License Utility was installed a part of the SmartDrone Installer
4. Select the License Server 
5. Then in the License Server window select "Search"
   1. this will populate the found activated licenses on the network 
6. select the found computer name or IP address and click "Add"
7. then select Save
8. Close the License Server window and click "Refresh License"
   
   1. The license Info should show up if successful 
   2. If the license info does not show up try restarting the computer 
   3. If on re-opening the Software License Utility, the Info is not within License Information talk with your IT department and ask if your network allows computers to be discovered within your network
9. If all else fails contact SmartDrone Support and we will schedule time with our specialist to review the setup.